Nandana Print Cotton Lungi – NPL005

840.00

Product Nandana hand block print lungi
Fabric Camric Cotton
Measurements Length: 2.25 meter Width: 44 inch
Craftsman Shri Pawan Jhariya
Concept and Designed by EcoFab
Genre Unisex (For both women & men)
P.S. You may find little difference in original product and picture due to camera quality.

2 in stock

Description

This dyeing craft of hand block printing only practiced in Tarapur village situated on the banks of Ghambhiri River in Madhya Pradesh. Nandana hand block print is having 16 steps going through cumbersome process of printing and dyeing. Almost 100 families of Tarapur and Ummedpura village of Javad tehsil were involved in the craft.

Today only 2 families are doing traditional hand block printing but they too left Nandana printing because of its tedious, time consuming process and no market reach. Traditionally Nandana process involved use of 4 designs namely, Mirch, Champakali, Amba & Jalam buta. Later on one more design “Dholamaru” introduced in this craft. To create a single design 4 different blocks used in the Nandana technique. Basically market for Nandana printing was limited to tribal people of Jhabua, Ratlam, Mandsaur and Neemuch district of Madhya Pradesh only. When tribal got low cost screen printed hosiery material as an alternative they left wearing Nandana.

EcoFab started working with one of the hand block printer family of Tarapur village in the year 2015 who was interested in reviving Nandana printing. Today it is available in green and blue shade and other shades work is in process.

Peculiarity of traditional Nandana hand block print are:

1. Use of natural mordant like alum to get red with alizarin, pomengranate peel and indigo to get green or black.
2. Use of fixed 5 designs right from small buti to big buta known as mirch, champakali, dholamaru, amba and jalam.
3. One design requires 3 different blocks.
4. Traditionally with natural shade available green but now a days under development process is available in blue, yellow and grey background using cold natural dyes also marketed as Nandana, because “Nand” or cold dye in vessel is used in the process.
5. It’s a 16 step process technique.

Sometimes all 5 designs used in Nandana with red and white combination with indigo background considered as Nandana printing. Technically it comes under Tarapur printing which is a combination of alizarin and indigo hand block printing. Since its inception Nanadana printing restricted to the tribal customer segment only so no development in terms of design and color variations done till date.

Traditionally Nandana is linked with both designs and cumbersome process.

In Nandana hand block printing process fabric first printed with begar (Alum) and then dyed with alizarin to get red design pattern. After this fabric get printed with Dabu resist with “resin” paste, in local chhippa community it is called as “Daamar” (Coal-tar in English)  covering red designs and dipped into indigo dye tank to get deep indigo blue background. Traditionally resin paste is used as a better resist so that fabric get dipped into indigo tank minimum 5-6 times till it gets deep blue. “Resin” was boiled for 24 hours than it printed on the fabric while boiling.
In this step boiling resin produces a bad odor and also sometimes it spates on the skin of craftsman create rashes.  After this fabric get boiled in soda ash solution to remove the “resin” paste. Now after washing the resist paste it again printed with mud resist and then dipped into pomegranate rind dye. After performing this step fabric background becomes deep green to black, some parts which was printed with resist becomes yellow and red is remain there. Now fabric is ready for market. Today “resin” paste is replaced with “mud” resist due to heath issues of craftsman.

Reviews

There are no reviews yet.

Be the first to review “Nandana Print Cotton Lungi – NPL005”

Your email address will not be published. Required fields are marked *